YASKAWA USAREM-05CFJ11伺服驱动电机模块

类目：RELIANCE
型号：USAREM-05CFJ11
全国服务热线：15270269218
手机：15270269218
微信：15270269218
QQ：3136378118
Email：3136378118@qq.com

在线咨询

产品详情

产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等。
主营DCS控制系统备件，PLC系统备件及机器人系统备件，
优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
YASKAWA USAREM-05CFJ11伺服驱动电机模块

运输、储存
运输、储存和正确使用说明应为：遵守。
气候条件应符合prEN 50178。设备的安装和冷却应符合相关文件中的规范。
驱动转换器应防止过度应变。特别是，部件不得弯曲或隔离距离在运输或搬运过程中改变的。任何接触不得可由电子元件和触点制成。
驱动转换器包含静电敏感组件，其：可能因使用不当而损坏。电气元件不得机械损坏或破坏（潜在健康风险）。
5.电气连接
在带电驱动转换器上工作时，适用的国家必须遵守事故预防规则（如VBG 4）。
电气安装应按照
相关要求（例如导体的横截面积，熔断、PE连接）。有关更多信息，请参阅文档。
符合EMC要求的安装说明，如屏蔽、接地、过滤器位置和接线
包含在驱动器转换器文档中。他们必须永远也适用于带有CE标志的驱动转换器。
遵守EMC法律要求的限值是安装或机器制造商的责任。
6.操作
包括驱动转换器的装置应配备：
附加控制和保护装置符合相关适用的安全要求，如有关技术设备的法案、事故预防规则等。驱动器的变化允许使用操作软件进行转换器。
在驱动转换器从电压源断开之后，不得触摸带电设备部件和电源端子由于可能通电的电容器，立即。在这方面，驱动转换器上的相应标志和标记必须得到尊重。
操作期间，所有盖子和门应保持关闭。
7.维护和保养
应遵循制造商的文件。此符号警告您注意可能导致人身伤害的高压人员和/或设备损坏。在适当情况下该符号旁边印刷的文字描述了此类风险的方式可以避免。
•晶闸管的所有电气安装和维护工作
电源转换器必须由合格人员执行他们在电气工程方面受过全面培训。
•晶闸管功率转换器及其相邻装置必须：由合格专业人员适当接地。
•不得对晶闸管电源进行任何操作转换器仍处于打开状态。首先关闭装置，使用一种测量仪器，确保功率转换器已真正断电，只有这样您才能从相关工作开始。
•由于外部控制电路，可能存在危险的高
即使在线路电压已关闭。因此始终使用
适当的谨慎！不遵守这些指示可能：导致受伤（甚至死亡！）。Transport, storage
The instructions for transport, storage and proper use shall be
complied with.
The climatic conditions shall be in conformity with prEN 50178.The installation and cooling of the appliances shall be in accordance
with the specifications in the pertinent documentation.
The drive converters shall be protected against excessive strains.
In particular, no components must be bent or isolating distances
altered in the course of transportation or handling. No contact shall
be made with electronic components and contacts.
Drive converters contain electrostatic sensitive components which
are liable to damage through improper use. Electric components
must not be mechanically damaged or destroyed (potential health
risks).
5. Electrical connection
When working on live drive converters, the applicable national
accident prevention rules (e.g. VBG 4) must be complied with.
The electrical installation shall be carried out in accordance with the
relevant requirements (e.g. cross-sectional areas of conductors,
fusing, PE connection). For further information, see documentation.
Instructions for the installation in accordance with EMC requirements, like screening, earthing, location of filters and wiring, are
contained in the drive converter documentation. They must always
be complied with, also for drive converters bearing a CE marking.
Observance of the limit values required by EMC law is the responsibility of the manufacturer of the installation or machine.
6. Operation
Installations which include drive converters shall be equipped with
additional control and protective devices in accordance with the
relevant applicable safety requirements, e.g. Act respecting technical equipment, accident prevention rules etc. Changes to the drive
converters by means of the operating software are admissible.
After disconnection of the drive converter from the voltage supply,
live appliance parts and power terminals must not be touched
immediately because of possibly energized capacitors. In this respect, the corresponding signs and markings on the drive converter
must be respected.
During operation, all covers and doors shall be kept closed.
7. Maintenance and servicing
The manufacturer’s documentation shall be followed.This symbol warns you of high voltages which may result in injuries
to persons and/or damage to equipment. Where appropriate, the
text printed adjacent to this symbol describes how risks of this kind
may be avoided.
• All electrical installation and maintenance work on the thyristor
power converter must be carried out by properly qualified staff
who have been thoroughly trained in electrical engineering.
• The thyristor power converter and its adjacent units must be
properly earthed by qualified professionals.
• You must NEVER perform any work on the thyristor power
converter while it is still switched on. First switch the unit off, use
a measuring instrument to make absolutely sure that the power
converter has really been de-energized, and only then you may
start with the work concerned.
• Due to external control circuits, there may be dangerously high
voltages present at the thyristor power converter even after the
line voltage has been switched off. So always work at the unit with
appropriate caution! Non-compliance with these instructions may
result in injury (or even death!).

RELIANCE

ABB

GE

FOXBORO

EMERSON艾默生

A-B

MOTOROLA

TRICONEX

HONEYWELL霍尼韦尔

HIMA

140系列PLC

BENTLY本特利

其他

SST

EPRO

YOKOGAWA

MOOG

NI

WOODWARD伍德沃德

METSO

KOLLMORGEN科尔摩根

力士乐

ALSTOM阿尔斯通

YASKAWA安川

AMAT

ICS TRIPLEX

新能源系列

EATON

YASKAWA USAREM-05CFJ11伺服驱动电机模块

扫一扫关注微信