欢迎您访问:瑞昌明盛自动化设备有限公司,我司将竭诚为您服务!
HONEYWELL 30735866-001串行链路控制器

主页 > 产品中心 > RELIANCE

HONEYWELL 30735866-001串行链路控制器

类目:RELIANCE
型号:30735866-001
全国服务热线:15270269218
手机:15270269218
微信:15270269218
QQ:3136378118
Email:3136378118@qq.com

在线咨询
产品详情
瑞昌明盛进出口贸易有限公司
主营DCS控制系统备件,PLC系统备件及机器人系统备件,
优势品牌:Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等。

HONEYWELL 30735866-001串行链路控制器 HONEYWELL 30735866-001串行链路控制器 HONEYWELL 30735866-001串行链路控制器 HONEYWELL 30735866-001串行链路控制器 HONEYWELL 30735866-001串行链路控制器
 0~2个百兆全双工光口,默认SC接口,可选FC、ST,远可传输120公里
* 0~2个SFP 1000Base-X module (支持单模和多模)或1000Base-T module (支持双绞线传输)
* 1个RS-232串口和可选1个RS-422/485串口或3个RS-485串口
* 支持Web、CLI和SNMP三种管理方式,其中CLI支持Telnet和CONSOLE登录
* 支持QoS,IGMP,802.1Q VLAN网管功能
* 支持RSTP和CK-ring,用于以太网冗余,环网自愈时间小于20ms
* 支持串口通过网络连接两个串口设备进行串口数据传输,支持TCP Server、TCP Client、UDP三种工作模式
* 支持ModbusTCP、ModbusRTU、IP、ARP和DNS协议
* 支持Modbus Slave模式,Slave模式下大支持12个Tcp master连接
* 支持继电器告警输出,用于电源、端口和环网状态告警
* 采用高强度IP40外壳及工业级EMC设计
* 支持冗余宽电压12~48V DC电源输入,满载功耗小于11W
* 支持导轨式或壁挂式安装
* 工作温度范围:-40~85℃,适合恶劣环境应用讯记科技工业以太网交换机特点:
* 支持Web、CLI和SNMP三种管理方式,其中CLI支持Telnet和console登录?
* 支持QoS,IGMP,802.1Q VLAN功能?
* 支持RSTP和CK-ring,用于以太网冗余,环网自愈时间小于20ms?
* 支持继电器告警输出,用于电源、端口和环网状态告警?
* 采用高强度IP40外壳及工业级EMC设计?
* 支持冗余宽电压12~48V DC电源输入,满载功耗小于12W?
* 支持导轨式或壁挂式安装?
* 工作温度范围: -40℃~85℃宽温环境,适合恶劣环境应用fault, host fault, communication system fault, module fault, software fault, etc.

1. General inspection and treatment of common faults the purpose of the general inspection is to find out the general direction of the fault point, and then gradually refine it to determine the specific fault point, so as to eliminate the fault. The PLC system host power supply, expander power supply and power supply in the module shall enter the power failure inspection process when any power supply display is abnormal. If the functions of each part are normal, only the LED display is faulty, otherwise the external power supply shall be checked first. If the external power supply is free of fault, then the internal power failure of the system shall be checked. The inspection sequence and contents are described in the table below.

4. Communication fault inspection and handling communication is the basis of PLC network work. The communication processor and communication module of the master station