IC693MDL231

After reaction, they are transported to the atomization unit for quantitative weighing, The atomization unit is fed into the fine powder machine according to a certain feeding speed by the frequency conversion speed regulating star type discharger, and the required particle size is formed by the fine powder machine and then fed into the atomization chamber for mixing. After mixing, the material is quantitatively transported to the grinding unit by the screw quantitative feeder. The smaller particles are formed by grinding, and the feeding and discharging of grinding unit can be carried out at the same time. After grinding, the material enters the reaction unit, the screw quantitative feeder adopts frequency conversion control, calculates the deviation between the set weight and the actual weight, and adjusts the speed according to the speed chart to realize the accurate feeding of the metering tank. After batching, the materials are transported to the corresponding high-speed heating mixer for mixing. The waste gas produced in the working cycle of high-speed mixer is separated, condensed and recycled by gas valve, and then released by induced draft fan. The solid particles in the waste gas are filtered by cyclone collector and bag filter, and then the vaporized chemicals are recovered by condenser. After the reaction, the material is transported to the drying unit. The drying cycle ends when the drying time, system temperature, pressure and vacuum system flow are close to the specified value. The material is transported to the grading unit, and the material particles are screened by the classifier, which is controlled by frequency conversion. After screening, the material particles are transported to the packaging unit to complete the finished product packaging.